Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

I use Wireshark and it runs under X11 environment I want take some screenshot from wireshark windows but cmd + shift + 3 or cmd + shift + 4 or ... didn't work there is there any way that I could take some screen shot in X11 environment?

share|improve this question
    
What do you see when you cmd shift 4 and selected the region? –  hobs Apr 26 '11 at 18:21
    
@hobs when I press cmd+shift+4 it types $ in wireshark search box. –  Am1rr3zA Apr 26 '11 at 19:37
    
Is Aqua window manager still running or are you in a non-default X11 mode different than simply firing up the standard X11.app after a normal user log in to OS X? –  bmike Apr 26 '11 at 20:59
    
@bmike I don't know what you mean by Aqua windows manager, if you mean the X111 grey windows, yes it runs and wireshark run within it. –  Am1rr3zA Apr 27 '11 at 7:44
add comment

3 Answers 3

up vote 0 down vote accepted

According to @calum-benson hint I find what was my problem I must un check Full-screen mode in X11 Preferences.

enter image description here

share|improve this answer
add comment

Have you tried using Grab.app? It supports a "timed screen" capture mode. You'd switch to Grab.app, select "Timed Screen..." then switch back to X11. After 10 seconds it will do a screenshot.

share|improve this answer
add comment

Click to the desktop or any other application, and then press + + 3.

With this method Wireshark will loose the focus and you can grab the whole screen.

share|improve this answer
    
there is no desktop when you cmd+tab to wireshark you go to another envirinment (X11) and if you want click desktop must switch to another application then your solution is useless for my case. –  Am1rr3zA Apr 26 '11 at 20:15
    
Not true, resize your wireshark window to have a little smaller and then you can click on the desktop, or use Expose to show the desktop click on it and use Expose to show your application again. I did it and it worked. –  KARASZI István Apr 26 '11 at 20:32
    
I don't know how you can do it because when I want run wireshark first it rum X11 (a grey environment) then run wireshark into X11 so when I minimize or resize wireshark I just see X11 Grey environment and can't resize it (or minimize) –  Am1rr3zA Apr 26 '11 at 20:42
    
On the download page you can download Wireshark images for OSX which starts X11 automatically and runs almost like a normal application. –  KARASZI István Apr 26 '11 at 21:36
2  
If you're seeing "a grey environment" whenever X11 starts up, then X11.app is running in full screen mode. Press Cmd-Opt-A to toggle that, then you should see Wireshark running as a regular window on your desktop, and the other screen grabbing suggestions here should work fine. –  scottishwildcat Apr 27 '11 at 12:43
show 1 more comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.