Ask Different is a question and answer site for power users of Apple hardware and software. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I just need to see the signal strength of WiFi stations I have around my house. It would be better to have it (signal strength) in a percentage format, because there some apps that show strength in some other difficult format.

share|improve this question

If you are talking dBm, which you will see most wifi scanning apps use, it is actually not that difficult to understand. Basically higher numbers are better, and even negative numbers actually represent positive quantities, just smaller ones.

From the wikipedia entry on dBm:

Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, which means that 3 dBm equals roughly 2 mW. For a 3 dB decrease, the power is reduced by about one half, making −3 dBm equal to about 0.5 milliwatt.

There is also a pretty dang useful chart.

  • −10 dBm Typical maximum received signal power (−10 to −30 dBm) of wireless network
  • −70 dBm Typical range (−60 to −80 dBm) of wireless received signal power over a network (802.11 variants)

Sorry for not answering the original question, but I think with this knowledge you will be able to powerfully determine the strongest source of transmissions.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.